MAXIMIZE YOUR RESULTS WITH TIME, LABOR & COST SAVINGS
For Small to Mid-Size Applications & Automation Projects
Vision 430™ Programmable Logic Controller
MAIN APPLICATIONS:
- Dryers control
- Trimmers control
- Sorted machines control
- Super critical CO2
- Close loop extraction
- Hydrocarbon (Propane / Butane)
- Ampoules Filling
- Packaging Sorting control
- Weight automation
- Bagging automation
Vision™ - Rugged and Compact
Main Features:
Expandable up to 512 I/Os, LoadCell for weight measurement, Remote access & Web Server, Alarms via Email & SMS, variety of communication interfaces & protocols, Recipe management, Color HMI screens and more.
Vision 430™
Advanced PLC Controller with incredible HMI Touchscreen Overview
Visilogic™ Software for Vision430™
All-in-One programming environment. Simple, fast development for both Ladder and HMI applications.
- Develop your PLC and HMI applications in one environment
- Configure hardware & communications
- Establish modem and data communications
- Test and debug your programs
- Software Utilities Suite: remote access and data management tools
Product Details
[table id=24/]
Vision430™ models - Onboard I/Os
[table id=23 /]
*Notes:
- In some models certain inputs are adaptable via wiring and software settings, and can function as digital,high-speed, analog, and in certain models as TC or PT100.
Adapting requires input pins. This reduces the number of digital inputs. Pin requirements:
• Each high-speed requires 1 or 2 pins according to high-speed mode.
• Each analog input requires 1 pin.
• Each TC requires 2 pins per TC input
• The first PT input requires 3 pins, and two additional pins for each additional PT input.
Example: V430-J-RA22 offers 12 digital inputs. Implementing 2 TC inputs requires 4 pins, leaving 8 pins free. Implementing 2 PT inputs uses 5 input pins. - The total number of digital inputs listed includes high-speed and adaptable inputs.
- The total number of digital outputs listed includes high-speed outputs.
*This page provides a general overview of Unitronics products.
For more details, please check the complete technical specifications for each product, located at the end of the page.
I/O Expansion Modules
[table id=19/]
*Notes
- Number of supported I/Os & I/O modules varies according to module
- The EXF-RC15 functions as a node in a Vision UniCAN network and connects to the Vision controller via CANbus and programmed in VisiLogic. The EXF-RC15 cannot be extended as regular I/O unit.
- The EX90 is housed in an open casing. Only one EX90 can be connected per PLC, as a single expansion module; Expansion adapter not required.
- Supported by Vision series. Not supported by M91 series.
- The total number of digital inputs listed includes high-speed inputs.. Example: the IO-D16A3-TO16 offers a total of 16 pnp/npn inputs. You can configure I4 as a HSC and I5 as a Counter reset; this reduces the available number of digital inputs to 14.
- The total number of digital outputs listed includes high-speed outputs. Example: the IO-D16A3-TO16 offers a total of 16 transistor outputs. You can configure 1 to High-speed output, reducing the number of available digital outputs to 15.
- Functions as local adapter. Can support up to 7 I/O modules
- 16-bit or 32-bit, depending on the PLC
- Also available as 12VDC – contact us for part number
*This page provides a general overview of Unitronics products.
For more details, please check the complete technical specifications for each product, located at the end of the page.
DOCUMENT DOWNLOAD
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
2D DRAWINGS
3D DRAWINGS
Hardware
Unitronics
- Unitronics Building
Haarava 3, Airport City
7019900, Israel - +972-3-9778844
- [email protected]